Vansoft Technologies

Where Technology Meets Solotions

Paintball Field Flags

The system caters for the Bushball players and alows for a new and exciting game play.


The field flag system connects to each other and communicates data non stop.  There are different versions of the flag with the elite system able to control smoke bombs, control system and trip wires.

GSM BaseLogger Version 2

The system caters for digital inputs and outputs as well as analog inputs.



The windows based server GSMBaseLog is a stand alone server that can monitor a number of sites controlled by GSM units. Functions are geared towards the GSM Commander but can interface to any unit that sends a SMS message. The server sends predefined or user defined commands to these units to control equipment and receives SMS's from the units. The received statuses are logged to a SQL database. These statuses are also decoded and mapped to modbus slots that can then be retrieved by a standard scada system using the modbus IP protocol.

GSM BaseLogger Version 1

The system caters for digital inputs and outputs only.



The windows based server GSMBaseLog is a stand alone server that can monitor a number of sites controlled by GSM units. Functions are geared towards the GSM Commander but can interface to any unit that sends a SMS message. The server sends predefined or user defined commands to these units to control equipment and receives SMS's from the units. The received statuses are logged to a CSV file or an Access database. These statuses are also decoded and mapped to modbus slots that can then be retrieved by a standard scada system using the modbus IP protocol.

Vansoft Modbus Tester

The tester implements a modbus master controller and modbus slave simulator with TCP/IP and RTU protocols.



The windows based modbus tester ModbusTest2012 is a stand alone master controller and slave simulator. The following modbus functions are implemented, read coils, read discrete inputs, read registers and read holding registers. The following output controls are implemented, write single coil and write single register. The slave unit can respond with error messages when commands are received to test master controllers.

8 Channel LED Dimmer

The Light Emitting Diode control system is an eight channel control and dimmer unit.



The VT Dimmer Main board has a total of 8 dimmer circuits each capable of driving a bank of LED’s. These channels can be configured to perform a multitude of functions depending on the selected mode. There are two models available, a 4 amp unit and an 8 amp unit. The two boards are functionally identical and differ only in the LED driver circuitry. The following section describes the modes that can be selected.